Auto electrics support

• Charging via the LOAD button and reading values directly on the screen.
• Green LED (GOOD): voltage > 10.8 V.
• Yellow LED (LOW): 10.8 V > voltage > 9.1 V.
• Red LED (BAD): voltage > 9.1 V.
• Connect the terminals to the battery terminals.
• CSW correction based on the value displayed on the battery.

• Number of pieces: 19
• Tools compatible with new VW-Audi group connectors.
• Used for: coolant sensors, wiring harnesses, and control unit connectors.
• Protects the wire and terminal.
• Knurled handles.

• Maximum load: 0.4T
• Weight: 0.296 kg
• Suitable for windshield wipers with or without built-in washers and for battery terminals.

• Voltage: 12 V.
• Peak current: 1600 A.
• Starting current: 440 A.
• Weight: 6 kg
• For gasoline and diesel engines.
• Booster with power adapter for UK sockets: E200413.

• 12 - 24 V.
• Weight: 0.22 kg
• Ideal for testing circuits, fuses, circuit breakers, and wiring in cars,
trailers, boats, motorcycles, and other low-voltage systems.
• Connect the alligator clip to ground, then test using the probe.
• The presence of voltage is indicated by a light in the handle.

• Polarity tester: LED + / -
• Voltages: 6-12-24-50-120-230-400 V
• DC/AC: 50-60 Hz
• Probe center-to-center distance: 19 mm (sockets)
• Weight: 0.176 kg
• Allows you to verify the absence of voltage in a circuit before starting work.
• Probe storage system.
• 2 LR44 1.5 V batteries included.
• IP 54
• IEC 61243-3/CAT III 600 V/CE Standard

• DC voltage measurement from 2 V to 24 V.
• Weight: 0.548 kg

• DC/AC voltmeter: 0 to 600 V.
• DC/AC ammeter: 0 to 400 A.
• Ohmmeter: 0 to 20 MΩ.
• Continuity: < 30 Ω.
• Maximum diameter of the measured wire: ø 32 mm.
• Weight: 0.325 kg

• DC/AC voltmeter: 0 to 250 V.
• Ohmmeter: 0 to 20 MΩ.
• Diode tester: 2.8 V / 1 mA.
• Weight: 0.323 kg

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Compatible with:
- 12 V jump starter: E200401.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Compatible with:
- 12 V jump starter: E200401.

NOTE: Product discontinued by the manufacturer. Suggested replacement in the "related products" tab.

• Voltage: 12 V
• Peak current: 2200 A.
• Inrush current: 840 A.
• Protection against peak voltage values.
• Automatic charger: 1.5 A.
• Insulated zinc-plated clamps.
• Copper cables: 55 cm / 28 mm².
• Charge level indicator.
• New EXODUS PRO-22 AGM battery.
• Durability: ABS housing.

• Weight: 0.2 kg
• Measures battery electrolyte density.
• Displays electrolyte density and state of charge percentage.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Infrared measurement range: -20°C to 520°C.
• Weight: 0.135 kg