Automotive

NOTE: This product has been discontinued by the manufacturer. Suggested replacement: DF.71 facom.

• 12 V brake bleeding unit.
• Tank capacity: 4 liters.
• Pressure adjustment up to 3.5 bar. 
• Manual pressure adjustment.
• Low-level automatic shut-off indicator. 
• Includes a reservoir for used fluid.
• Includes a universal plug and a 12 V power cable with battery clamps.
• Dimensions: 330 x 330 x 270 mm.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Weight: 0.04 kg
• 2 tools in 1:
- One side: for removing and replacing tire valve inserts.
- Other side: conical with left-hand thread for removing damaged valve cores.
• Suitable for light commercial vehicles and motorcycles.

NOTE: This product has been discontinued by the manufacturer. No suggested replacements are available.

• Weight: 0.51 kg
• For attaching or removing wheel balancing weights.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Weight: 0.43 kg
• For disassembling the exhaust system.
• Access even to hard-to-reach areas.
• Suitable for a wide range of passenger cars and vans.

NOTE: This product has been discontinued by the manufacturer. Suggested replacement: DM.BVA facom.

• Capacity: 7.5 L
• This device is designed for filling gearboxes, differentials, and transfer cases with oil.

• Set includes:
- Universal wheeled jack, 3T: E200141.
- 2 supports, 3T: E200143.

• Number of items: 7
• Set includes:
- Wiper arm puller, 0.4T.
- Mini multi-purpose suction cup.
- Set of suction cups for windshield replacement.
- Skewer with "T" handle.
- Mini scraper with retractable blade.
- Windshield cutting kit.
- Silicone gun.
• Packaging: plastic case.

• Lifting capacity: 30 T
• The lift body is welded to the base for greater durability.
• Simple, robust design increases the device’s reliability.

• Lifting capacity: 20 T
• The lift body is welded to the base to ensure greater durability.
• A simple, robust design increases the equipment's reliability.

• Lifting capacity: 12 T
• The lift body is welded to the base to ensure greater durability.
• The simple, robust design increases the reliability of the equipment.

• Lifting capacity: 8 T
• The lift body is welded to the base to ensure greater durability.
• A simple, robust design increases the reliability of the device.

• Lifting capacity: 5 T
• The lift body is welded to the base to ensure greater durability.
• A simple, robust design increases the reliability of the device.

• Lifting capacity: 2 T
• The lift body is welded to the base to ensure greater durability.
• The simple, robust design increases the device's reliability.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Compatible with:
- 12 V jump starter: E200401.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Compatible with:
- 12 V jump starter: E200401.

• Charging via the LOAD button and reading values directly on the screen.
• Green LED (GOOD): voltage > 10.8 V.
• Yellow LED (LOW): 10.8 V > voltage > 9.1 V.
• Red LED (BAD): voltage > 9.1 V.
• Connect the terminals to the battery terminals.
• CSW correction based on the value displayed on the battery.

NOTE: Product discontinued by the manufacturer. Suggested replacement in the "related products" tab.

• Weight: 25.8 kg
• Lifting capacity: 12 T
• Dimensions (L x W x max. H): 307 x 294 x 702 mm
• Two supports with a rack.
• Quick adjustment.
• Carrying handle.

NOTE: Product discontinued by the manufacturer. Suggested replacement in the "related products" tab.

• Weight: 14.5 kg
• Load capacity: 6 T
• Dimensions (L x W x max. H): 235 x 270 x 618 mm
• Two supports with a rack.
• Quick adjustment.
• Carrying handle.

NOTE: Product discontinued by the manufacturer. Suggested replacement in the "related products" tab.

• Weight: 6.4 kg
• Load capacity: 3 T
• Dimensions (L x W x max. H): 170 x 195 mm x 432 mm
• Two supports with a rack.
• Quick adjustment.
• Carrying handle.

NOTE: This product has been discontinued by the manufacturer. A recommended replacement is available in the "Related Products" tab.

• Weight: 36.5 kg
• Lifting capacity: 3.2 T
• Max. lift height: 504 mm
• Minimum ground clearance: 145 mm
• Supplied with a cover for the lifting head and a foam cover for the handle to protect the vehicle body.
• Metal wheels.
• EN 1494.

• Weight: 0.006 kg
• Easy blade replacement.
• Supplied with 3 blades.
• Capacity to store 2 blades in the rear compartment.
• Compatible with:
- Set of 5 scraper blades: E201520.

• Weight: 0.085 kg
• Compatible with:
- Windshield removal tool: E201513.
• Packed in sets of 6.

• Weight: 0.274 kg
• Tool for cold cutting windshield seals.
• Blade set at a 90° angle, replaceable.
• Main handle for inserting and guiding the blade.
• Pulling handle for applying cutting force.
• Compatible with:
- set of 6 blades: E201514

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Number of pieces: 4
• Weight: 0.306 kg
• Protects against damage when cutting the windshield seal using a piano wire.
• Flat or rounded shapes to fit all cutouts.

• Weight: 0.185 kg
• Length: 5 m
• Made of stainless steel.
• Square cross-section for effective and fast cutting.
• For use with pulling handles: E201516.

• Number of pieces: 3
• Weight: 0.36 kg
• Set includes:
- A pair of pulling handles for cutting windshield seals.
- Piano wire: E201518.

• Weight: 0.13 kg
• Flat blade with a notch at the end, allowing the cutting cord to be inserted through the windshield seal.
• T-shaped plastic handle for greater comfort and strength.

• Maximum load: 0.2T
• Weight: 0.14 kg
• Allows wiper arms to be removed without damage.
• For passenger cars and small vans.

• Number of components: 2
• Weight: 0.011 kg
• 2 pairs of Ø 78 mm suction cups.
• Suction cups connected by a 400 mm long cord in a protective sleeve that prevents damage to the paintwork.
• Holds the side window in place while working on the window mechanism.
• Allows you to keep your hands free while working.

The mini suction cup is currently unavailable.

• Weight: 0.065 kg
• Suction cup Ø 55 mm.
• Load capacity up to 5 kg.
• Ideal for small glass surfaces, such as mirrors.

NOTE: This product has been discontinued by the manufacturer. Suggested replacement: CR.VENT55 facom.

• Weight: 0.38 kg
• Suction cup Ø 55 mm.
• Load capacity up to 10 kg.
• Suction effect created by pressing the two handles together.
• Can be used with one hand.

• Weight: 2.53 kg
• Suction cup with pump Ø 254 mm.
• Load capacity up to 130 kg.
• Vacuum drop indicator.
• Quick suction release button.

• Number of components: 6
• Suction cups Ø 78 mm.
• Essential for holding decorative body parts or the windshield in place during bonding.
• Adjustable via a screw system.

• Weight: 0.285 kg
• Length: 5 m
• Used with a pair of suction cups for positioning the windshield.
• Compatible with:
- Double suction cup for windshield replacement: E201502.
- Set of suction cups for glass replacement: E201501.

• Weight: 0.75 kg
• Pair of suction cups Ø 117 mm.
• Load capacity up to 40 kg.

• Number of components: 3
• Weight: 1.78 kg
• 2 pairs of suction cups Ø 117 mm: E201502.
• Ratchet strap: E201503.
• Pair of suction cups with a load capacity of up to 40 kg.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Weight: 11.4 kg
• Length: 770 mm
• Height: 1005 mm
• For use with all types of windshields.

NOTE: Product discontinued by the manufacturer. No suggested replacements.

• Number of pieces: 12
• Weight: 0.81 kg
• Set includes:
- 5 1/4” hex sockets, 80 mm long, for accessing fasteners.
- 7 tools designed for installing and removing airbags.

• Load capacity: 226 kg
• For use in workshops and industry.
• Foldable, adjustable leg spacing thanks to safety chains.

• Load capacity: 115 kg
• Surface area: 1 m²
•Locks to secure the legs in the open position.
• Folding legs for easy transport.
• Ideal for repair work or for vehicles with high suspension.

• Number of pieces: 9
• Weight: 0.665 kg
• Set includes:
- tools for opening vehicle doors if keys are locked inside, without breaking the glass.
• For professional use only.
• Supplied in a case without instructions.

• Weight: 0.2 kg
• Enables controlled opening of autoclave doors.
• Prevents scratches and unnecessary damage.
• Inflation system using a bulb.